pscinc

Dust Collector BagsPTFE Dust Collector BagsFiltration FabricsFiltration Test ResultsaluminanewsletterslinksContact Ushomeaddress



Activated Alumina - F200-E

aluminaActivated alumina F200-E is the best all purpose desiccant for drying air and most other gases with high relative humidities. Dewpoints of - 100°F can be achieved (depending on dryer). activated alumina F200-E can be used in both heated and heatless/pressure swing dryers.

Activated alumina F200-E has: excellent porosity creating torturous paths and extended surface area; high strength against crushing; and very stable physical and chemical characteristics, even in high temperature and corrosive environments.

Activated Alumina

bullet -100°F dew points obtainable
bullet Unaffected by catastrophic liquid water loading
bullet Ideal for both heatless and heat regenerated systems
bullet Low regeneration temperature 250°F to 500°F

 

Activated Alumina Specifications
   
Bead size (in.) 1/8", 3/16", 1/4" (custom sizes available)
   
Moisture removal at 40%RH 13.5%/wt
   
Moisture removal at 60%RH 20%/wt
   
Moisture removal at 100%RH 40%/wt
   
Crush strength (lbs) 30-70 (depends on grade)
   
Abrasion Loss (%/wt) <0.1
   
RH - Relative Humidity  
   
%/wt - Percent Weight  

We offer custom desiccant solutions. Desiccant with different characteristics are available. A sales professional can work with you to select a cost-effective desiccant solution that meets or exceeds your drying requirement. Service technicians are also available to change your dryer's desiccant and perform all other services.

 
     

Dust Collector Bags---PTFE Dust Collector Bags---Filtration Roll Goods---Filtration Test Results---Activated Alumina---Newsletters---Links---Contact Us---Home